Menu Close

C038 3/8 in. Plastic Pump

Diaphragm pump, Conductive Nylon. AODD pumps, Although the air-powered pump eliminates ignition from electrical motors and internal combustion engines when pumping flammable fluids there is still the possibility of static electrical charge build-up on the outside of the pump. All-flo now provides a solution through the use of conductive thermoplastic compounds in combination with proper grounding techniques.

Conductivity of the outside wetted parts is gained through the blending of microfilaments of stainless steel within the thermoplastic. The volume resistance from any metallic clamp or fastener to the grounding lug (provided on the band clamp) has been factory tested to be less than 1000 Ohms. These pumps can help meet NFPA grounding requirements for the system.

  • The Conductive Nylon (CN Models) are often used for lubricants, oils and fats (both animal and vegetable types) hydrocarbons. Nylon offers superior resistance to that of acetel in the area of solvents and solvent-based products. Will transfer flammable fluids.
Category:
AIR INLET
  • 1/4″ FNPT
LIQUID INLET
  • 3/8″
LIQUID DISCHARGE
  • 3/8″
CONNECTION TYPE
  • FNPT/FBSPT (Threaded)
MAX SUCTION LIFT CAPABILITY
  • 10 ft-H2O (3.0 m-H2O) Dry
  • 26 ft-H2O (7.9 m-H2O) Wet
MAX FLOW RATE
  • 9 gpm (34.0 lpm)
MAX PRESSURE
  • 120 psi (8.2 bar)
MAX DIAMETER SOLIDS
  • 1/16″ (1.6 mm)
DISPLACEMENT PER STROKE
  • 0.01 gal (0.04 L)