Processing & Industrial · Australia-wide
Accurate, repeatable chemical dilution and application for food and beverage, metalworking, printing and general industrial operations — so you control chemical use, cut waste and keep production running.
Precision Flow Solutions supplies chemical dosing, dispensing and lubrication equipment for processing and industrial operations across Australia. From food and beverage plants to metalworking, printing and general industrial sites, our injectors and proportioners deliver accurate, repeatable dilution and application, so you control chemical use, cut waste and keep production running. We supply, install and service from our Northmead base in Sydney.
Many of our injectors are water-powered, running on line pressure with no electricity required. That lowers running cost, simplifies installation in wet and wash-down areas, and supports your sustainability and energy reduction goals.
Hover or tap the markers to see where our dosing and dispensing systems fit across a processing or industrial site.
Food and beverage plants need consistent sanitation and cleaning that meets hygiene requirements without slowing the line. We supply foaming and sanitising systems for equipment, surfaces and large areas, floor and drain cleaning, conveyor lubrication, and vehicle and entry-point sanitation for biosecurity. Accurate dilution means approved sanitisers are applied at the right strength every time, which supports programs such as HACCP. Our equipment applies the sanitisers you choose, so always follow the product label and your food safety plan.
Water-powered volumetric proportioners automatically dilute and apply conveyor and chain lubricant at a consistent rate, reducing friction and wear and keeping lines moving. Automatic dosing removes manual application, cuts lubricant waste, and helps avoid the stoppages and product damage that come from dry or over-lubricated chains. Browse our water-driven range.
Correct concentration is everything in metalworking. Our water-powered injectors accurately dilute and dispense cutting oils, coolants and other metalworking fluids, so you protect tools and workpieces, extend fluid life and reduce waste. Consistent mixing avoids the tool wear and surface defects that come from fluids mixed too rich or too lean.
Proportioning systems dilute concentrate to a consistent chemistry for printing fountain solutions and other regularly used mixes, so print quality stays stable and operators are not mixing by hand. Accurate, repeatable dosing keeps every batch to the same recipe.
For general industrial cleaning we supply proportioners and injectors that fill spray bottles, mop buckets, sinks and scrubbers at precise dilutions, foaming and spraying units for large areas, and floor and hard surface cleaning. We also supply injectors for odour control and dust suppression, and spraying and sanitation systems for vehicle entry and exit points, loading bays and biosecurity.
Precision Flow Solutions is the Australian supplier for leading dosing and dispensing brands, held in local stock with installation, spare parts and technical support.
Proportioners, injectors and conveyor lubrication systems across a broad range of flow and injection rates.
Water-pressure operated foaming and sanitising systems for food plant cleaning, vehicle wash-down and biosecurity.
Dosing and proportioning systems using venturi and pump technology for industrial cleaning and sanitation.
A sample of the injectors, pumps and foaming systems we supply for processing and industrial sites.
Browse by capability
Guides and insights on chemical dosing, dilution and dispensing from the Precision Flow team.
Processing and industrial dosing equipment serves food and beverage plants, metalworking and machining operations, printing, and general industrial sites. The same core technology, accurate proportional dilution and dispensing, is applied to sanitation, conveyor lubrication, metalworking fluids, fountain solutions, odour control and cleaning.
A water-powered volumetric proportioner dilutes conveyor or chain lubricant to a set ratio and applies it automatically at a consistent rate. This removes manual lubrication, reduces friction and wear, cuts lubricant waste, and helps avoid the stoppages and product damage caused by dry or over-lubricated chains.
Yes. Water-powered injectors dilute and dispense cutting oils, coolants and other metalworking fluids at an accurate, repeatable concentration. Correct mixing protects tools and workpieces, extends fluid life and reduces waste compared with hand mixing.
Many do not. Water-powered injectors and proportioners run on line pressure alone with no electrical connection, which lowers running cost, suits wet and wash-down areas, and supports sustainability goals. Some applications use air-operated pumps where a powered feed is preferred.
Food processing sites use foaming and sanitising systems for equipment, surfaces and large areas, floor and drain cleaning, and spraying and sanitation for vehicle entry points and loading bays. The equipment applies approved sanitisers at the correct dilution to support hygiene programs such as HACCP, following the product label and your food safety plan.
Yes. We supply, install and service processing and industrial dosing, dispensing and lubrication equipment across Australia from our Northmead facility in Sydney, and we hold local stock of injectors, proportioners and spare parts for fast support.
Precision Flow Solutions supplies chemical dosing and dispensing systems across a range of industries.
Our sales and customer service teams are ready to help with any of your chemical dispensing needs. We also offer custom solutions for specific applications.
Contact Usor call 02 9625 8122
